XPS 40mA Series EMC & LVD Tested Models XPS 40mA Series — CE Electronic Neon Power Supply
XPS 40mA Series EMC & LVD Tested Models 40mA
Features:
- Output current is 40mA, suitable for Cold Cathode Lighting or neon tube>Dia. 12mm.
- High power factor and low electromagnetic disturbance measuring up to EMC standards.
- Output over voltage protection.
- Fully sealed and waterproof,Ideal for both indoor and outdoor use.
- No mercury migration or " jelly-bean" effects.
- Specially positioned GTO cables, one each side of the casing reduce the possibility of arcing, sparking and high-voltage cross-over etc.
- Output current is 40mA, suitable for Cold Cathode Lighting or neon tube>Dia. 12mm.
- High power factor and low electromagnetic disturbance measuring up to EMC standards.
- Output over voltage protection.
- Fully sealed and waterproof,Ideal for both indoor and outdoor use.
- No mercury migration or " jelly-bean" effects.
- Specially positioned GTO cables, one each side of the casing reduce the possibility of arcing, sparking and high-voltage cross-over etc.
Environmental Specifications :
- Operating temperature: -25℃ ~ +40℃
- Cooling:Convection
- Relative humidity:5% to 100%
- Installation:Indoor or Outdoor
- Operating temperature: -25℃ ~ +40℃
- Cooling:Convection
- Relative humidity:5% to 100%
- Installation:Indoor or Outdoor
Certificates & Standards :
- CE-EMC:EN 55015; EN 61547; EN 61000-3-2; EN 61000-3-3
- CE-LVD:EN 61347-2-10; EN 61347-1
- CE-EMC:EN 55015; EN 61547; EN 61000-3-2; EN 61000-3-3
- CE-LVD:EN 61347-2-10; EN 61347-1
XPS-6000-40| Model | XPS-6000-40 | ||||
|---|---|---|---|---|---|
| SIZE LXWXH(mm) | 252*57*39 | ||||
| Packing | 20 pcs; G.W.:18kg; 0.04m³ | ||||
| Input | 220-240VAC 50/60Hz 0.6A | ||||
| Power | 144W | ||||
| Output | 3000-E-3000V 35/50mA(norm) | ||||
| Power factor | PF>0.92, THD≤38% | ||||
| Working frequency | 37-40KHz | ||||
| Over-load protection | Yes | ||||
| Open-circuit protection | Yes | ||||
| Earth-leakage protection | Yes | ||||
| IP Rating | IP66 | ||||
| Input cable | 0.5m | ||||
| Input plug | optional | ||||
| Input switch | No | ||||
| Output cable | 0.5m | ||||
| Ext.dimming control app. | No | ||||
| Ext.flashing control app. | Yes | ||||
| Diameter Tubing(mm) | 12 | 13 | 15 | 18 | 20 |
| Gas Pressure(mmHg) | 11 | 10 | 9 | 8 | 7 |
| Load length(ft.)Clear/Neon | 18 | 19 | 23 | 25 | 28 |
| Load length(ft.)Mercury/Argon | 21 | 23 | 28 | 30 | 32 |
| Load length(m)Clear/Neon | 5.4 | 5.7 | 6.9 | 7.5 | 8.4 |
| Load length(m)Mercury/Argon | 6.3 | 6.9 | 8.4 | 9.0 | 9.6 |
XPS-8000-40| MODEL | XPS-8000-40 | ||||
|---|---|---|---|---|---|
| SIZE LXWXH(mm) | 289*67*46 | ||||
| Packing | 10 pcs; G.W.: 14kg; 0.03m³ | ||||
| Input | 220-240VAC 50/60Hz 0.8A | ||||
| Power | 192W | ||||
| Output | 4000V-E-4000V 35/50mA | ||||
| Power factor | PF>0.92, THD≤38% | ||||
| Working frequency | 25-28KHz | ||||
| Over-load protection | Yes | ||||
| Open-circuit protection | Yes | ||||
| Earth-leakage protection | N/A | ||||
| IP Rating | IP66 | ||||
| Input cable | 0.5m | ||||
| Input plug | optional | ||||
| Input switch | No | ||||
| Output cable | 0.5m | ||||
| Ext.dimming control app. | No | ||||
| Ext.flashing control app. | Yes | ||||
| Diameter Tubing(mm) | 12 | 13 | 15 | 18 | 20 |
| Gas Pressure(mmHg) | 11 | 10 | 9 | 8 | 7 |
| Load length(ft.)Clear/Neon | 23 | 25 | 31 | 33 | 35 |
| Load length(ft.)Mercury/Argon | 26 | 31 | 36 | 38 | 41 |
| Load length(m)Clear/Neon | 6.9 | 7.5 | 9.3 | 9.9 | 10.5 |
| Load length(m)Mercury/Argon | 7.8 | 9.3 | 10.8 | 11.4 | 12.3 |
Notes:
- The above maximurn loading length figures are for reference only. The actual loading capability may vary due to different installation methods or environmental factors. Electrodes calculations are included, no need to deduct the length for electrodes.
- The tubing diameters not indicated above are not recommended to be used with the power supply.
- Length figures for mercury filled tubes are based on operation in temperatures above 4℃(40
) .It's recommended to deduct 25% from the figures for operation below 4℃(40 )
- The above maximurn loading length figures are for reference only. The actual loading capability may vary due to different installation methods or environmental factors. Electrodes calculations are included, no need to deduct the length for electrodes.
- The tubing diameters not indicated above are not recommended to be used with the power supply.
- Length figures for mercury filled tubes are based on operation in temperatures above 4℃(40
) .It's recommended to deduct 25% from the figures for operation below 4℃(40 )