MXP Series — Metal Case Electronic Neon Power Supply, 40mA

MXP Series ------Metal Case Electronic NeonPower Supply

Features:
- Innovative high reliability circuitry design with electronic magnetic flux leakage transformer inside an aluminum case.
- Symmetrical wave form output, zero mercury migration.
- High constant current output up to 40mApeak,good for neon or cold cathode tubes.
- With substantial aluminum heat sink housing, designing for high ambient temperature area or poor convection applications.
- Fully sealed and waterproof, good for outdoor applications.

Environmental Specifications :
- Operating temperature: -30℃ ~ 50℃@full load
- Cooling: Convection
- Relative humidity: 5% - 100%

Model	MXP-12000-40
Input	220-240VAC 50/60Hz 600mA
Power	144W
Output	12kV AC 40mA
Power factor	PF>0.9, THD<38%
Working frequency	20-22KHz
Over-load protection	Yes
Open-circuit protection	Yes
Earth-leakage protection	N/A
IP Rating	IP66
Input cable	0.5m
Input plug	No(optional)
Input switch	No(optional)
Output cable	0.5m
Ext.dimming control app.	No
Ext.flashing control app.	Yes
Diameter Tubing(mm)	12	13	15	18	20
Gas Pressure(mmHg)	11	10	9	8	8
Load length(ft.)Clear/Neon	30	33	36	36	36
Load length(ft.)Mercury/Argon	33	36	40	40	40
Load length(m)Clear/Neon	9	10	11	11	11
Load length(m)Mercury/Argon	10	11	12	12	12

Model	MXP-15000-40
Input	220-240VAC 50/60Hz 800mA
Power	192W
Output	15kV AC 40mA
Power factor	PF>0.9, THD<38%
Working frequency	19-21KHz
Over-load protection	Yes
Open-circuit protection	Yes
Earth-leakage protection	N/A
IP Rating	IP66
Input cable	0.5m
Input plug	No( optional)
Input switch	No( optional)
Output cable	0.5m
Ext.dimming control app.	No
Ext.flashing control app.	Yes
Diameter Tubing(mm)	12	13	15	18	20
Gas Pressure(mmHg)	11	10	9	8	8
Load length(ft.)Clear/Neon	37	40	43.3	43.3	43.3
Load length(ft.)Mercury/Argon	40	43.3	46.7	46.7	46.7
Load length(m)Clear/Neon	11	12	13	13	13
Load length(m)Mercury/Argon	12	13	14	14	14

Notes:
- The above max loading length figures are for reference only, the actual loading capability may vary due to different installation or environmental factors. Electrodes are included, no need to deduct the length for electrodes.
- The tubing diameters not indicated above are not recommended to be used with the power supply.
- Length figures for mercury filled tubes are based on operation in temperatures above 4℃(40 ) .It's recommended to deduct 25% from the figuress for operation below 4℃(40 )