EP Series — High Voltage AC Output Neon Power Supply
EP Series-------------High Voltage A.C. Output Model
Features:
- Electronic type neon power supply.
- Compact size and light weight.
- No gas tubes discoloration or no mercury migration, perfect for mercury tubes.
- Safe and reliable with built-in open circuit protection and thermal protection.
- Completely sealed and waterproof.
- Electronic type neon power supply.
- Compact size and light weight.
- No gas tubes discoloration or no mercury migration, perfect for mercury tubes.
- Safe and reliable with built-in open circuit protection and thermal protection.
- Completely sealed and waterproof.
Environmental Specifications :
- Operating temperature: -25℃~+40℃
- Cooling: Convection
- Relative humidity: 5% to 100%
- Installation: Indoor or Outdoor
- Operating temperature: -25℃~+40℃
- Cooling: Convection
- Relative humidity: 5% to 100%
- Installation: Indoor or Outdoor
Certificates & Standards :
- GB19510
- GB19510
| Model | EP-7500-30 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Size LXWXH(mm) | 135*56*39 | ||||||||||
| Weight(Kg) | 0.39 | ||||||||||
| Input | 230VAC 50/60Hz 0.3A | ||||||||||
| Power | 69 W | ||||||||||
| Output | 7500V AC 30mA | ||||||||||
| Power factor | PF>0.9, THD<30% | ||||||||||
| Working frequency | 34-37KHz | ||||||||||
| Over-load protection | Yes | ||||||||||
| Open-circuit protection | Yes | ||||||||||
| Earth-leakage protection | N/A | ||||||||||
| IP Rating | IP 65 | ||||||||||
| Input cable | 0.5m | ||||||||||
| Input plug | Optional | ||||||||||
| Input switch | No | ||||||||||
| Output cable | 0.6m | ||||||||||
| Ext. dimming control app. | Yes | ||||||||||
| Ext. flashing control app. | Yes | ||||||||||
| Loading Length Data Sheet | |||||||||||
| Diameter Tubing(mm) | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 15 | 18 | 20 | 22 |
| Gas Pressure(mmHg) | 18 | 17 | 15 | 13 | 12 | 11 | 10 | 9 | 8 | 7.5 | 7 |
| Load length(ft.)Clear/Neon | 11 | 11 | 13 | 16 | 20 | 23 | 25 | 30 | 36 | 39 | 43 |
| Load length(ft.)Mercury/Argon | 11 | 13 | 16 | 20 | 25 | 26 | 30 | 36 | 39 | 46 | 49 |
| Model | EP-10000-30 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| SizeLXWXH(mm) | 160*62*43 | ||||||||||
| Weight(kg) | 0.58 | ||||||||||
| Input | 230VAC 50/60Hz 0.4A | ||||||||||
| Power | 92 W | ||||||||||
| Output | 10000V AC 30mA | ||||||||||
| Power factor | PF>0.9, THD<30% | ||||||||||
| Working frequency | 21-24KHz | ||||||||||
| Over-load protection | Yes | ||||||||||
| Open-circuit protection | Yes | ||||||||||
| Earth-leakage protection | N/A | ||||||||||
| IP Rating | IP 65 | ||||||||||
| Input cable | 0.5m | ||||||||||
| Input plug | Optional | ||||||||||
| Input switch | No | ||||||||||
| Output cable | 0.6m | ||||||||||
| Ext. dimming control app. | Yes | ||||||||||
| Ext. flashing control app. | Yes | ||||||||||
| Loading Length Data Sheet | |||||||||||
| Diameter Tubing(mm) | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 15 | 18 | 20 | 22 |
| Gas Pressure(mmHg) | 18 | 17 | 5 | 13 | 12 | 11 | 10 | 9 | 8 | 7.5 | 7 |
| Load length(ft.)Clear/Neon | 15 | 16 | 18 | 21 | 26 | 30 | 33 | 39 | 46 | 52 | 62 |
| Load length(ft.)Mercury/Argon | 16 | 18 | 20 | 26 | 30 | 33 | 39 | 46 | 52 | 62 | 69 |
Notes:
- The above maximum loading length figures are for reference only. The actual loading capability may vary due to different installation methods or environmental factors. Electrodes calculations are included, no need to deduct the length for electrodes.
- The tubing diameters not indicated above are not recommended to be used with the power supply.
- length figures for mercury filled tubes are based on operation in temperatures above 4℃(40
).Deduct 25% from the figures for operation below 4℃(40)
- The above maximum loading length figures are for reference only. The actual loading capability may vary due to different installation methods or environmental factors. Electrodes calculations are included, no need to deduct the length for electrodes.
- The tubing diameters not indicated above are not recommended to be used with the power supply.
- length figures for mercury filled tubes are based on operation in temperatures above 4℃(40
).Deduct 25% from the figures for operation below 4℃(40)